SolidWorks專門論壇 SolidWorks forum

 找回密碼
 註冊
查看: 12040|回復: 7

SOLIDWORKS 2016 SP4.0 發布

[複製鏈接]
發表於 2016/7/28 10:46:59 | 顯示全部樓層 |閱讀模式


Service Pack 4.0

草圖工具游標
草圖工具游標變更為使用鉛筆型的圖示,此圖示與 SOLIDWORKS2015 及更早版本中使用的圖示類似。現在不再使用十字標示型的草圖工具游標。
  

圖示更多彩
預設與傳統圖示組中的圖示使用更多色彩。為了改善圖示清晰度,圖示將使用強調顯示色彩,例如在閃電和鉛筆上使用黃色、在開啟和輸入箭頭上使用綠色,以及在選擇濾器上使用紫紅色。

















Fixed SPRs*

SOLIDWORKS 2016 SP4 EV
SPR #
Description
Product
299645
Systems - File Properties: Global variables cannot be combined with other parameters like dimensions or other global variables in custom properties.
SOLIDWORKS
324889
Drawings - View General: The drawing view is not Aligned by origin, when Aligning view command is executed twice consecutive.
SOLIDWORKS
348758
Translator - IGES: Foreign Language - Chinese Traditional: Save Chinese name part file as IGS format, and get junk character name IGS file which can not be opened directly.
SOLIDWORKS
384787
Parts, Feature - Pattern: Direction of Circular pattern axis is incorrect while selecting sketch entity as axis to pattern.
SOLIDWORKS
386626
SOLIDWORKS Simulation - Misc: Ability to increase size of Function Curves dialog in SOLIDWORKS Simulation (or display a tooltip with full path when hovering over drop-down menu items)
SOLIDWORKS Simulation
393150
DXF/DWG - Translator: Line weight information in SOLIDWORKS Drawing file gets lost after save as DWG/DXF file
SOLIDWORKS
424986
SOLIDWORKS PDM - Replication: Advanced settings selections get lost if first Replication connection has no schedule.
SOLIDWORKS PDM
445694
Drawings - Crosshatch: Boundary Area Hatch/Fill layer cannot be changed.
SOLIDWORKS
450149
User Interface - Property Tab Builder: Tab key does not allow switching to the next text boxes in custom properties tab.
SOLIDWORKS
458524
SOLIDWORKS PDM - Installation: The Enterprise PDM 2009 Installshield Wizard shows confusing information 'Web Server' while upgrading Enterprise PDM Editor client
SOLIDWORKS PDM
514008
Drawing Views - Generation: View boundary does not include alternate position view after creating a detail view and force rebuilding (Ctrl-Q)
SOLIDWORKS
517983
SOLIDWORKS Simulation - Connector - Bolt: Foundation bolt can be applied in the nonlinear static and dynamic analysis, but the Virtual wall condition is inaccessible.
SOLIDWORKS Simulation
537427
SOLIDWORKS Simulation - Thermal Contact Set, Weldment Interface: Cannot create insulated thermal contact set - 'For thermal resistance contact sets must be unique' error.
SOLIDWORKS Simulation
537857
SOLIDWORKS API: ILayerMgr::GetCurrentLayer() and ILayerMgr::SetCurrentLayer() do not behave as expected
SOLIDWORKS API
542992
SOLIDWORKS PDM - Dispatch: Combo Box in Dispatch will not allow more than 13 items in the list.
SOLIDWORKS PDM
544805
SOLIDWORKS Simulation - Trend Tracker: The unit of mass is always Kg and does not follow the units set in the file or SOLIDWORKS/Simulation Options.
SOLIDWORKS Simulation
561761
SOLIDWORKS - Message System: A Refresh of the Inbox will clear the message list display if the Full name doesn't match the Login name of the user.
SOLIDWORKS PDM
582372
SOLIDWORKS Simulation - Materials, Static Solver: 'Please define Elastic Modulus in material properties' error when running study after applying certain custom materials to SOLIDWORKS model even though Elastic Modulus is defined.
SOLIDWORKS Simulation
587111
SOLIDWORKS Simulation - Plane 2D Interface: Cannot select entities in newly created 2D simplification study.
SOLIDWORKS Simulation
594053
Graphics, Hide, Show - Modeling Instant3D: Isolate command causes crash when multiple parts are selected and Instant3D manipulator appears on toolbox part.
SOLIDWORKS
597867
SOLIDWORKS API: Ordinate dimension cannot be created on center mark (possibly centerline too.
SOLIDWORKS API
600694
SOLIDWORKS Simulation - Mesh: Enhancement: Section the mesh quality plot to see the interior mesh of components.
SOLIDWORKS Simulation
603658
Model Display settings including color & Advanced (Ambient, Diffuse, Specularity, Shineness, Transparency, Emission) are not saved with part template.
SOLIDWORKS
604437
SOLIDWORKS PDM Integration, Windows Explorer: Right Mouse Button (RMB) menu Print fails to print Microsoft Office documents using Windows 7 x64 inside Enterprise PDM vault view.
SOLIDWORKS PDM
605769
SOLIDWORKS Simulation - Static Postprocessing: Mesh & results folder show a warning sign after creating a deformed body either as a new configuration or part.
SOLIDWORKS Simulation
606047
Drawings - View Generation: Very low performance to create a drawing and insert some views of this part with big pattern if center marks are automatically inserted.
SOLIDWORKS
612544
SOLIDWORKS PDM - Message System: Automatic notifications (e-mails) should display 'Full Name' in addition to just the 'login name' if they differ - difficult to know which user performed the operation.
SOLIDWORKS PDM
619339
SOLIDWORKS Simulation - Static Interface: Error 'The units for all component links attached to a single parameter need to be the same' for parameter attached to spring preload value.
SOLIDWORKS Simulation
619983
SOLIDWORKS Simulation - Connector-Spot, Edge Weld: Edge weld results for Euro code is displaying weld size and Weld throat size as same.
SOLIDWORKS Simulation
620140
SOLIDWORKS Simulation - Composite Interface: Composite stack with ply thickness of less than 0.01 gets rounded up to 0.01 when saved to csv file and then loaded
SOLIDWORKS Simulation
620745
SOLIDWORKS Simulation - Static Interface: Wrong units for the Moment in the Remote load values in the Simulation Manager tree.
SOLIDWORKS Simulation
621088
SOLIDWORKS Simulation - Misc: Elapsed time in solver progress dialog is reset to 0 after 24 hours.
SOLIDWORKS Simulation
633753
SOLIDWORKS Simulation - Thermal Postprocessing: For List Heat Power, the default unit is always BTU/s no matter what unit system (SI, English, Metric) is selected in the options.
SOLIDWORKS Simulation
640086
SOLIDWORKS Simulation - Static Postprocessing: Excluded bodies are not visible eventhough the option 'Show excluded bodies' is checked in Simulation Options.
SOLIDWORKS Simulation
640116
SOLIDWORKS Simulation - Composite Postprocessing: X and Y Normal Stresses are zero at boundary of compatibly bonded composites with ‘Display Results in Ply Direction on Composite Surfaces' enabled.
SOLIDWORKS Simulation
643885
SOLIDWORKS Simulation - Materials: Message to save changes displays when switching between some custom materials when no changes have been made.
SOLIDWORKS Simulation
664510
SOLIDWORKS Simulation Misc: There is no Help document after clicking Help button in the Solver Message window.
SOLIDWORKS Simulation
668034
SOLIDWORKS Simulation - Composite Postprocessing: Presence of solid body and use of 'Display results in ply direction on composite surfaces' in Stress plot causes areas of zero stress in graphics area.
SOLIDWORKS Simulation
689287
SOLIDWORKS Electrical - Reports: Enhancement: Add Ability to include location descriptions in reports.
SOLIDWORKS Electrical
689451
User Interface - General , Enhancement: F1 for Help should work when there are no commands running.
SOLIDWORKS
693508
SOLIDWORKS Simulation Report: “Upper bound axial and bending” stress is still listed as “Worst case” in a report.
SOLIDWORKS Simulation
694969
Assemblies, Virtual Components, Assembly Features: Crash when assigning material and then select option "Make Virtual".
SOLIDWORKS
716015
Sheet Metal Form Tools File Properties: Crash adding punch ID to library feature properties after inserted into sheet metal part.
SOLIDWORKS
716911
Task scheduler - Translator - DXF, DWG: Dimension value changes on moving the view or dimension text in DXF/DWG file saved from SOLIDWORKS Drawing using Task Scheduler.
SOLIDWORKS
720736
SOLIDWORKS Simulation - Static Postprocessing: Option 'Stress plot floating with one decimal (recommended)" doesn't work when the Pressure/Stress unit is MPa
SOLIDWORKS Simulation
722405
Sheet Metal Flanges: Custom bend allowance set into Swept bends of swept flange feature does not work
SOLIDWORKS
725118
SOLIDWORKS Simulation - Misc: The copyright year for the solver .OUT files is outdated.
SOLIDWORKS Simulation
729476
SOLIDWORKS Simulation - Deformed Geometry: Mesh is getting invalidated after creating body from deformed shape.
SOLIDWORKS Simulation
731765
SOLIDWORKS Electrical - Symbols, Create, Edit: Update symbol -> Selected Only updates all symbols in drawing.
SOLIDWORKS Electrical
734935
SOLIDWORKS PDM - Tasks: Enhancement: Tasks that use Draftsight to convert files to PDF (including DWGs)
SOLIDWORKS PDM
735318
SOLIDWORKS Electrical - General, Performance: Performance issue in SOLIDWORKS Electrical -3D in Windows 8 operating system.
SOLIDWORKS Electrical
737139
SOLIDWORKS Electrical - General: All the files get closed when trying to close a single assembly file.
SOLIDWORKS Electrical
738758
SOLIDWORKS Simulation - Post Processing: 'Show plot only on selected entities' option doesn't work on Pressure Vessel study plots.
SOLIDWORKS Simulation
741976
Sheet Metal Features - Tables: Crash selecting a gauge table in the Convert to Sheet Metal PropertyManager while editing a cell in an open Excel worksheet.
SOLIDWORKS
748221
SOLIDWORKS Electrical - 3D Routing, Wiring: Enhancement: Add the ability to mass set User Data / Translatable data of a group of selected components
SOLIDWORKS Electrical
750156
SOLIDWORKS PDM Integration - SOLIDWORKS Add-In: SOLIDWORKS Add-In takes time to refresh large reference tree when switching active Window, inserting component, opening assembly etc. 'Doc_GetList' shows long duration *vault specific*
SOLIDWORKS PDM
753152
User Interface - General Assembly: 'Browse for file' selection, in 'Unable to locate the file…' dialog box, is not remembered when dialog is dismissed; components are suppressed on open.
SOLIDWORKS
759722
SOLIDWORKS Simulation - Static Interface: User Interface should not allow selection of 'Large Displacement' option in Static studies with beam elements.
SOLIDWORKS Simulation
771824
Translator - IFC Import: SOLIDWORKS crashes for a different way to describe the reference units - by Graphisoft ArchiCAD-64.
SOLIDWORKS
775552
SOLIDWORKS Simulation - Connector - Bolt: Problem with display and location of the local coordinate system for bolt connector force results - only for Foundation bolt type.
SOLIDWORKS Simulation
780809
Drawings Views - Detail, Crosshatch, Crop , Isometric: Hatch pattern 'AEC sand' and 'Dots' does not display in the detail, crop, isometric views
SOLIDWORKS
789881
SOLIDWORKS API - Options: Weld bed is giving incorrect swUserPreferenceToggle value.
SOLIDWORKS API
792244
SOLIDWORKS Simulation - Contact Set: Interface lets you drag and drop (copy/paste) a Shrink Fit contact from a Static study to a Frequency study
SOLIDWORKS Simulation
793485
Sheet Metal - Tables: Inserting bend table at Part Level sheet metal feature does not propagate change to convert-to-shm (solid) bends.
SOLIDWORKS
797353
SOLIDWORKS Electrical - Import, Export: DWG Import - Mutated vowels aren't imported correctly using the DWG import.
SOLIDWORKS Electrical
803870
SOLIDWORKS Simulation - Load Case Manager, eDrawings Publisher: Cannot save eDrawings published from Load Case Manager when running Load Case Manager before running initial study.
SOLIDWORKS Simulation
804615
SOLIDWORKS Electrical -Schematic: Foreign Language - Korean: Translation missing in Korean version when going to "Tool>Interface Configuration> Rights
SOLIDWORKS Electrical
806059
SOLIDWORKS Electrical - Reports: SQL queries for reports show case sensitive behavior for operators when adding variables and simple formulas.
SOLIDWORKS Electrical
806987
SOLIDWORKS Simulation - Static Solver Interface: Run Specified Studies Status dialog box - "Cancel" button should be replaced with "Close" or "OK" after studies are run successfully.
SOLIDWORKS Simulation
807364
SOLIDWORKS Electrical - General: Foreign Language - Russian: In SW3D, “Unable to run eDrawings 2015 x64” error message is not translated.
SOLIDWORKS Electrical
807385
User Interface - Feature Manager: Comments window size is not saved properly after resizing.
SOLIDWORKS
807759
SOLIDWORKS Electrical - General: Foreign Language - Russian: Russian User Interface - Wrong Translation for the word Customize in Component properties For Connector.
SOLIDWORKS Electrical
807952
DXF/DWG - Translator: DWG file saved from this SOLIDWORKS drawing does not display the sheet size correctly when opened in DraftSight
SOLIDWORKS
809370
SOLIDWORKS Simulation - Load Case Manager: What’s wrong icon is shown on Simulation design tree when running load cases. What’s wrong says Result files are not available.
SOLIDWORKS Simulation
809625
SOLIDWORKS Routing - Library Manager: SOLIDWORKS Routing Library Manager becomes unstable after overwriting existing pipe using component wizard.
SOLIDWORKS Routing
819351
SOLIDWORKS PDM - Tasks: Enhancement: Provide Task functionality to convert DWG files.
SOLIDWORKS PDM
822139
SOLIDWORKS Electrical - General: Archive Environment - System data - Incorrect System data summary.
SOLIDWORKS Electrical
832502
User Interface - Options: Dismissed message for revision symbols does not appear in Tools > Options > Messages/Errors/Warnings.
SOLIDWORKS
833490
Translator - STEP - Import: SOLIDWORKS crashes import ISO 10303-21 step file.
SOLIDWORKS
835975
SOLIDWORKS Simulation - Weldment Solver: Mixed mesh study with only shells and solids fails with 'One or more load/fixture...may not be valid' error if there is a beam excluded.
SOLIDWORKS Simulation
836226
User Interface - General Display - Parts: Instability opening any part document if Draft Analysis feature is located in the heads up toolbar.
SOLIDWORKS
836252
Sheet Metal - Base Geometry: Changes in Bend Allowance (K-factor) parameters does not propagate to the convert to solid bend feature(s).
SOLIDWORKS
839327
SOLIDWORKS Electrical - General: EPLAN Macro Converter-Ability to convert symbols with variants..
SOLIDWORKS Electrical
841714
SOLIDWORKS Electrical - Libraries: Symbols Manager - The symbol is not shown in the filters, specific library, if the symbol was edited after the library name was changed.
SOLIDWORKS Electrical
845263
SOLIDWORKS Electrical - Help Documentation: Foreign Language -French: Wrong translation in the SOLIDWORKS Electrical Help - Internet. 'Home' is not translated. The french word 'Accueil'.
SOLIDWORKS Electrical
846942
SOLIDWORKS Routing - Cabling: The wire colors are not displaying in flatten manufacture drawing connector block.
SOLIDWORKS Routing
852999
SOLIDWORKS Simulation Report: When using N/mm^2 units for Pressure/Stress, Report gives material density in units of g/cm^3 but does not convert the value correctly.
SOLIDWORKS Simulation
854915
SOLIDWORKS Electrical - Libraries: Library - Component classification - Root - Root marks are linked
SOLIDWORKS Electrical
855245
SOLIDWORKS Simulation - Weldment Solver: 'Beam is not properly bonded to shell...' error persists between certain sheet metals and beams in this model when solving.
SOLIDWORKS Simulation
855780
SOLIDWORKS Simulation - Loads: Velocity or acceleration in excitation can not be linked with parameter that has correct units.
SOLIDWORKS Simulation
856180
Localization: Foreign Language - Chinese Traditional: Windows 8 specific issue, weirdly reported only in Traditional Chinese.
SOLIDWORKS
858160
SOLIDWORKS Simulation - Materials: 'Apply Material to All Bodies' in study with only beams works OK, but when using this command again, default library material (Alloy Steel) is shown.
SOLIDWORKS Simulation
859225
SOLIDWORKS Electrical - Schematic: Foreign Language - Russian: Russian-Associate and Dissociate cable cores translation in cable manager are the same.
SOLIDWORKS Electrical
860690
SOLIDWORKS Inspection - Add-in: Sub-Type does not recognize 'Diameter' when opening a project file which exported from Inspection Add-in.
SOLIDWORKS Inspection
861000
SOLIDWORKS Electrical - Drafting: Schematic - Draw multiple wires - Base vertical wires invert when horizontal lines are longer that about half a page.
SOLIDWORKS Electrical
862031
Assemblies, Interference Detection, Performance: Attached assembly hangs after clicking on Interference detection command.
SOLIDWORKS
864607
SOLIDWORKS API - Save, Close - Assembly: Failed to save 3D PDF from assembly file.
SOLIDWORKS API
865013
Sketch Relations, Inferences: After sketching one line then a second line, horizontal & vertical relations buttons are not shown in the PropertyManager.
SOLIDWORKS
865419
SOLIDWORKS Electrical - Schematic: Box select the symbol not work in SOLIDWORKS Electrical -2D.
SOLIDWORKS Electrical
867001
SOLIDWORKS Electrical - General: On a clean installation the Projects Manager User Interface is broken if the 'Filters' panel is activated.
SOLIDWORKS Electrical
873947
SOLIDWORKS Simulation - Materials: Unable to apply/edit material when selecting the body first from the Graphics Area.
SOLIDWORKS Simulation
876535
Systems - General: Windows Explorer search (indexing) is unable to search SOLIDWORKS 2015 format files files by description. iFilter no longer works.
SOLIDWORKS
876657
Sheet Metal - Multi-Body: Deleting edge flange suppresses flatten feature in flat-pattern configuration.
SOLIDWORKS
877773
SOLIDWORKS PDM Integration - Windows Explorer: Windows shortcut paths to folders in vault view gets first two characters truncated in folder name and becomes unusable after upgrading system to Enterprise PDM 2015 or newer.
SOLIDWORKS PDM
878234
SOLIDWORKS Simulation - Report: The decimal is not continuous, if the separator for 1000 chosen.
SOLIDWORKS Simulation
878565
SOLIDWORKS Simulation - Load Case Manager: 'Non existent information' error message when running Load Case Manager studies with a Remote Load with Rigid Connection (Direct Transfer is OK)
SOLIDWORKS Simulation
881776
SOLIDWORKS PDM - Search: Content search result includes all files in Private State.
SOLIDWORKS PDM
884871
SOLIDWORKS API, Reload, Replace: Crash of the AssemblyDoc::ReplaceComponent API
SOLIDWORKS API
885892
Parts, Feature - Hole Wizard: Dowel (Slot) hole wizard crash when reducing slot length to a value minor or equal to hole size.
SOLIDWORKS
885939
SOLIDWORKS Electrical - Terminals: Manufacturer part causes terminal strip drawing to be shorter then defined constraints.
SOLIDWORKS Electrical
886128
Graphics, Color, Appearances: STEP - IGES - export - faces does not keep the current color - data useful for a CAM system.
SOLIDWORKS
887767
SOLIDWORKS Flow Simulation - Solver: Solver is abnormally terminated error is shown when setting radiation.
SOLIDWORKS Flow Simulation
889372
SOLIDWORKS Simulation - Design Study: Verification Problems have their design studies missing when opening model with 'Load all Simulation studies when opening a model' option disabled.
SOLIDWORKS Simulation
889445
SOLIDWORKS Simulation - Loads: Units for linear and angular items in 'Force-Nonuniform distribution 'is not changed with default unit options always shows' mm 'and ' deg '
SOLIDWORKS Simulation
889535
Graphics, Display - Parts Hide, Show - Modeling: Hide/Show bodies is not stored in the display state
SOLIDWORKS
896761
Graphics, PhotoView 360 - General: Alpha channel does not work when saving a motion study as TGA files (Rendered by Photoview 360). Background could not be hidden..
SOLIDWORKS
897133
Sheet Metal - Corners: Corruption: Rolling forward to corner relief feature causes crash giving message 'SOLIDWORKS 2015 has stopped working', in the attached file..
SOLIDWORKS
897500
SOLIDWORKS Electrical - General: Vague Error message when no pdf reader is installed.
SOLIDWORKS Electrical
897614
SOLIDWORKS API Layers, Line font: Toggle issue: ILayer::Printable property toggles between true and false if set multiple times.
SOLIDWORKS API
898638
SOLIDWORKS Simulation - Mesh: File specific - Unable to mesh the sheet metal part completely.
SOLIDWORKS Simulation
898810
SOLIDWORKS Routing - Tubing SOLIDWORKS Routing - Piping: 'An invalid argument was encountered' message on selecting fittings in change route diameter Property manager.
SOLIDWORKS Routing
898850
SOLIDWORKS Simulation - Misc: The name of ‘Mesh Quality Plot’ is inconsistent among ‘Command, PropertyManager and Help doc.
SOLIDWORKS Simulation
899048
Assemblies, Rollback, Suppress: Part with inserted part crashes when base model is loaded into memory and rebuild command issued.
SOLIDWORKS
900064
SOLIDWORKS Simulation - Dynamic Postprocessing: Response graph at Remote Mass location have constant null values when the model contains a beam element
SOLIDWORKS Simulation
901067
SOLIDWORKS Utilities: Compare Geometry - automatic definition of folder name doesn't work while comparison is run second time.
SOLIDWORKS
901323
SOLIDWORKS Simulation - Component Contact: Component Contact “select bodies” box does not clear when contact is created while pinned.
SOLIDWORKS Simulation
903279
Systems - General - Tools: DrawCompare window does not display.
SOLIDWORKS
903571
User Interface - Options: Copy settings wizard cannot restore the settings exported from SOLIDWORKS 2015.
SOLIDWORKS
903809
Assemblies, Mate - Standard: Mate label remains in graphic area after closing view mates dialog.
SOLIDWORKS
904738
Drawings - Dimension - DRW (Edit, Revise, Locate): Arrow head disappears in dimension leader when this is changed from to multi-jog leader. This issue doesn't occur in SOLIDWORKS 2015 SP2.1 or earlier.
SOLIDWORKS
904792
SOLIDWORKS PDM - Tasks: Computer supporting the task list is showing duplicate values if the OfficeToPDF Add-In is imported on top of the Print Task.
SOLIDWORKS PDM
905370
SOLIDWORKS Simulation - Weldment Interface: Error after opening saved simulation study.
SOLIDWORKS Simulation
905466
User Interface - General: Configurations option list menu is blank in Property Managers with button size set to medium or large.
SOLIDWORKS
905772
SOLIDWORKS Simulation - Thermal Interface: Heat power annotation's unit shows 'SI'.
SOLIDWORKS Simulation
905980
Translator - IFC Import: Opening the Industry Foundation Classes / IFC file forces SOLIDWORKS to hang.
SOLIDWORKS
905985
SOLIDWORKS Simulation - Misc: Unconstrained bodies procedure does not identify rotation about axis normal to the plane for fully unconstrained body in case of 2D simplification study
SOLIDWORKS Simulation
906340
Sheet Metal Flanges - API: "Make Drawing from Part" command crash issue found in SOLIDWORKS 2015 Service pack 4.0
SOLIDWORKS
906855
Assemblies, Reload, Replace - General: Replacing a component in a sub-assembly crashes SOLIDWORKS in this specific workflow.
SOLIDWORKS
906938
Sheet Metal Features: Convert to sheet metal doesn't follow gauge table like base flange . override parameters are turned on for bend allowance and auto relief.
SOLIDWORKS
908532
Model Based Definition - 3D PDF: Several components are missing in section views, in viewport, of 3D PDF and annotations do not display; thumbnails are correct.
SOLIDWORKS
908903
SOLIDWORKS Simulation - Restraints: Under constrained Bodies tool wrong results for rotational degrees of freedom when selecting only edges.
SOLIDWORKS Simulation
910287
SOLIDWORKS Simulation - Misc: Find Under constrained Bodies tool misses two free rotation of the cylinder in this model (solution exists to this problem).
SOLIDWORKS Simulation
911219
SOLIDWORKS Electrical - General, User Interface:Branding not updated under the 'Link to PDM Configuration' DB, the word 'Enterprise' should be removed
SOLIDWORKS Electrical
911741
SOLIDWORKS Simulation - Mesh: Foreign Language - General: Texts of 'Calculate Minimum Element Size' dialog of 'Blended curvature-based mesh' are not shown completely.
SOLIDWORKS Simulation
911747
SOLIDWORKS Simulation -SimulationXpress Postprocessing: 'Generate eDrawings file' in SimXpress (or 'Save All Plots as eDrawings' in Simulation w/ 'Continuous' Fringe) shows all green FOS plot in eDrawings
SOLIDWORKS Simulation
913603
User Interface - General: View sketch dimensions icon and smart dimension icon are identical (no eyeglasses icon to distinguish them)
SOLIDWORKS
915476
SOLIDWORKS Electrical - Export, PDF Files: Problems generating bookmarks and cross references/origin destination arrows on larger projects.
SOLIDWORKS Electrical
915652
Sheet Metal Bends Feature - Sweep: SOLIDWORKS crashes when editing a sweep feature.
SOLIDWORKS
916089
SOLIDWORKS Simulation - Mesh: Lady Bug icon appears on a Mesh control when meshing another mesh control included on the model.
SOLIDWORKS Simulation
916189
Drawings - Dimension - DRW (Select, Create) Drawing Views - Detail, Cropped: Extension line is missing in detail view, when adding the dimension by Model Items or Smart command.
SOLIDWORKS
916237
SOLIDWORKS Electrical - Terminals: Insert terminal - Terminal properties - Wrong circuit list displayed in the Edit terminals dialogue
SOLIDWORKS Electrical
916477
User Interface - General, Enhancement: Ability to change the sketch cross hair back to the pencil icon.
SOLIDWORKS
918221
Drawings - Dimension - DRW (Select, Create) Decals: Unable to place dimension between edge of view and alternate position view.
SOLIDWORKS
918446
User Interface - View Orientation: View of ice cube view selector covers the ice cube when Windows screen resolution is set to 125% or 150%.
SOLIDWORKS
918580
SOLIDWORKS Simulation - Dynamic Postprocessing: Dynamic analyses give wrong reaction force results for beam elements. Solids and Shells give right results.
SOLIDWORKS Simulation
918801
SOLIDWORKS Electrical - Drafting: Wires assigned to layer in 2014 schematics do not maintain layer selection when upgraded to 2015
SOLIDWORKS Electrical
919479
SOLIDWORKS API: ReplaceComponents Method (IAssemblyDoc) does not re-attach mates - Different behavior than the Replace Component feature into the SOLIDWORKS environment
SOLIDWORKS API
919612
SOLIDWORKS Plastics - Preprocessing: Foreign Language - German: Wrong Translation In the general Plastics Tree: Cool 'Einstellugen' . Correct is 'Einstellungen'
SOLIDWORKS Plastics
920700
Drawings - Dimension - DRW (Select, Create): Dimension is not placed at first click on Rapid dimensioning manipulator - need to hover the cursor a little bit to place the dimension.
SOLIDWORKS
922018
Localization, Foreign Language - Chinese Traditional: User Interface, Hole Wizard: Hole wizard dimension is messy on SOLIDWORKS 2015 SP4for Windows 8.1 platform
SOLIDWORKS
922073
SOLIDWORKS Simulation - Dynamic Postprocessing: Response graph at the remote location does not work for applied model.
SOLIDWORKS Simulation
923089
SOLIDWORKS Electrical - General: Standard templates to use 'Automated generation of drawings from Excel' should be provided with installation.
SOLIDWORKS Electrical
923111
Drawings - Dimension - DRW (Edit, Revise, Locate): 'Center Dimension' option positions dimension text incorrectly when created between tangent edges in a detail view.
SOLIDWORKS
923789
Localization - Foreign Language - Japanese Toolbox - General: Japanese : Warning 'Error Reading database table HJ' occurs when selecting JIS of Structural Steel from Toolbox.
SOLIDWORKS
923908
User Interface - Customize General: 'New Group' Button changes to checkbox in Structural Member Property Manager in Weldment, When ‘Interface Brightness’ is set to ‘Dark'.
SOLIDWORKS
923984
Toolbox - Calculators: Foreign Language - General: "Error reading the database table height" error message for Toolbox Structural Steel DIN HE-Trager for German User Interface. Similar issue for French.
SOLIDWORKS
924087
SOLIDWORKS API Configurations - AssembliesUnfolding issue in SOLIDWORKS.
SOLIDWORKS API
924666
SOLIDWORKS API: Problem Creating Feature Manager Tab using IModelViewMgr.CreateFeatureMgrWindowFromHandlex64
SOLIDWORKS API
924741
DXF/DWG - Translator - PDF Out: SOLIDWORKS crashes saving this Part as 3d PDF.
SOLIDWORKS
925185
Drawing Views - Section Views, Broken: Copying and pasting a hidden drawing view which contains a Broken-out section is causing this view to become corrupt.
SOLIDWORKS
926181
Costing - General: Foreign language-Russian: Costing estimation tool fails when gusset selected in Body list.
SOLIDWORKS
926985
Parts, Tools - Mass, Section Properties: 'Selected faces are not in the same or parallel planes message is displayed when selecting two or more surfaces and clicking recalculate in Section Properties
SOLIDWORKS
927456
SOLIDWORKS PDM - File Version Upgrade Tool: Analyze files step from file version upgrade tool takes 2 days when executing stored procedure
SOLIDWORKS PDM
927905
SOLIDWORKS Simulation -Report, Dynamic Analysis: Incorrect Lower and Upper Frequency limits are displayed as zero (0 Hz) in report as compared to the Random Vibration Operating Frequency limits.
SOLIDWORKS Simulation
928382
Parts, Feature - Library: Unable to insert library feature in the part.
SOLIDWORKS
929441
SOLIDWORKS Electrical - Schematic: Switch options in wire group properties> 'Calculation of multiple wire order number' does not work after numbering wires once time.
SOLIDWORKS Electrical
929859
User Interface - Property Manager Feature - Library: Part icon of Library feature part does not update in Feature Manager tree.
SOLIDWORKS
930174
SOLIDWORKS Electrical - Terminals: Unable to set attribute of terminal to hidden.
SOLIDWORKS Electrical
930853
Drawings Views - Section, Broken: In a section of a break view, you cannot move the section view label easily.
SOLIDWORKS
930922
Drawings - View Generation: Cannot dimension from the alternative drawing position to the initial position (base position).
SOLIDWORKS
930924
DXF/DWG - Translator: Save as DXF will remove OLE Excel table.
SOLIDWORKS
930998
Drawings, Annotations - Centerline, Center Mark: Dangling Center mark could not be reattached.
SOLIDWORKS
931155
SOLIDWORKS Electrical - Reports: Upper case text in variable in Report > Properties > Sort and break > Title formula returns "Error"
SOLIDWORKS Electrical
931308
SOLIDWORKS API - Assembly Rollback, Suppress: Crash when iterating features.
SOLIDWORKS API
931467
Drawings Views - Section, Broken: Annotations, Centerline: Centerlines endpoints of Broken section view shifts/display at incorrect location.
SOLIDWORKS
931911
Drawings - Dimension - DRW (Tols, Symbols): Hole Callout limit tolerance upper value is showing incorrect units for dual dimension.
SOLIDWORKS
931926
Parts - Configurations, General: Crash while toggling between configurations.
SOLIDWORKS
932095
SOLIDWORKS Electrical - Reports: 'Content of first Column header in Report>Properties>Columns changes when click from third columns of first language header row.
SOLIDWORKS Electrical
932108
SOLIDWORKS Electrical - 3D SOLIDWORKS Routing, Wiring: 'Wrong definition of 2D Schematic pin ID' when route components have only 1 cpoint 0_0
SOLIDWORKS Electrical
932137
User Interface - General: Part and Assembly origins are very small with 4K monitor and high Dots per Inch (DPI) settings (200%).
SOLIDWORKS
932327
SOLIDWORKS Electrical - Terminals: Terminal strip drawings repeat cores listings when detailed cabling is enabled and terminal strip is split onto multiple pages..
SOLIDWORKS Electrical
932404
SOLIDWORKS Electrical - Drafting: Stretch command moves elements at different rates.
SOLIDWORKS Electrical
932648
SOLIDWORKS Simulation Postprocessing - Sensors: Sensors for individual connectors do not work for pin connectors from specific time step. Only value from step 1 is shown.
SOLIDWORKS Simulation
932810
Drawings, Annotations - Centerline, Center Mark: Cannot create dimension for auto inserted Center mark with patterned hole and connection lines.
SOLIDWORKS
933079
SOLIDWORKS Electrical - Import, Export: There is no Book Mark in Exported PDF file if there are too many drawings with symbols which included images.
SOLIDWORKS Electrical
933208
SOLIDWORKS PDM - Data Import and Export: 'document_id' and 'path' in bomrow of component is not described in xml file exported for CAD BOM when the assembly and the components are copied and renamed by copy tree, checked in and then status is changed wit
SOLIDWORKS PDM
933211
Sheet Metal - Features: Open the part in SOLIDWORKS 2016, and Force rebuild produces rebuild errors, which were not there in the previous versions of SOLIDWORKS.
SOLIDWORKS
933303
SOLIDWORKS Simulation - Misc: Copying a fixture or load from static analysis changes the frequency study to static if the "Load all Simulation studies when opening a model (requires more time to open a model)." option is activated.
SOLIDWORKS Simulation
933327
Drawings - Dimension - DRW (Select, Create): Hole Wizard Location dimension added using Insert Model Items is shown as an Asian (Chinese or Korean) character
SOLIDWORKS
933341
SOLIDWORKS PDM Integration, Windows Explorer :'SnagIt editor' and other screen capture applications can cause 'Paste as Reference' to not work. Right Mouse Button option disabled.
SOLIDWORKS PDM
933390
SOLIDWORKS Simulation - Load Case Manager: Coordinate system triad missing on plots in the load case manager reports.
SOLIDWORKS Simulation
933398
SOLIDWORKS Simulation Postprocessing: Crash while deleting the folder with materials from simulation tree.
SOLIDWORKS Simulation
933412
SOLIDWORKS Simulation - Misc: Crash while user duplicates or deletes or renames any study.
SOLIDWORKS Simulation
933466
SOLIDWORKS Simulation -Static Solver - Postprocessing: Model with distorted elements is allowed to solve with Direct Sparse solver, but shows improper zero stress/displacement/strain results
SOLIDWORKS Simulation
933615
SOLIDWORKS Electrical - Reports: Terminal strip drawing is wrong if two cable cores from different cables are connected to the same terminal.
SOLIDWORKS Electrical
933638
Model Specific: STAR solver crash when solving static study with Large Displacement option using FFEPlus or Large Problem Direct Sparse (LPDS)
SOLIDWORKS Simulation
933828
Parts, Feature - Library, Performance: Library feature are rebuild in a loop for this assembly/part file without "link to library part".
SOLIDWORKS
934168
Drawings - Dimension - DRW (Select, Create): Hole dimension is disappearing in drawing view
SOLIDWORKS
934770
SOLIDWORKS Simulation - Fatigue: In fatigue analysis (constant amplitude), Mean Stress Correction should be ignored if there is only one S/N curve and one Event, and if its Stress Ratio is equal to the Load Ratio of the Event
SOLIDWORKS Simulation
935356
SOLIDWORKS Electrical - Terminals: Wrong order of terminals in the terminal strip editor.
SOLIDWORKS Electrical
935363
SOLIDWORKS Electrical - Terminals: Cable cores are not grouped together in the terminal strip editor.
SOLIDWORKS Electrical
935514
SOLIDWORKS Electrical -Schematic, Macros: "Nothing to paste" warning error when insert macro with only graphic.
SOLIDWORKS Electrical
935523
Systems - File Properties: Configuration Specific Properties values overwritten for Part with Inserted Part.
SOLIDWORKS
935533
SOLIDWORKS Electrical - Reports: 3D Update Cable/Wire Length does not work in case there are Routed Wires sketches in the same assembly.
SOLIDWORKS Electrical
935621
Parts, Feature - Weldments: Structural Member feature temporarily displays path segments in group box when select multiple segments for one group.
SOLIDWORKS
935773
SOLIDWORKS Simulation - Load Case Manager eDrawings User Interface: eDrawings published from Load Case Manager, mismatch between plot and legend for all but first load case
SOLIDWORKS Simulation
935855
SOLIDWORKS Simulation - Postprocessing: When saving result plots with 'Continuous' fringe option as eDrawings files, they show patchy, invalid results when opened in eDrawings.
SOLIDWORKS Simulation
935913
SOLIDWORKS Electrical - Terminals: Terminal bridges are displayed on wrong position.
SOLIDWORKS Electrical
935914
Drawings - Dimension - DRW (Select, Create): During smart dimension third edge should not be allowed for selection.
SOLIDWORKS
935948
SOLIDWORKS Electrical - Libraries, Macros: Macros imported from previous version are imported as "Undefined" macro type. Not possible to search for them in the macros side panel.
SOLIDWORKS Electrical
936300
SOLIDWORKS Electrical - Libraries: Drawing list description is displayed wrong in the drawing list report drawing.
SOLIDWORKS Electrical
936370
SOLIDWORKS API: AssemblyDoc::ReplaceComponents results in a read only component if two of them use the same part file.
SOLIDWORKS API
936522
SOLIDWORKS Simulation -Static Solver: FFEPlus solver gives incorrect strain and stress result with finer mesh and non-zero prescribed displacement.
SOLIDWORKS Simulation
937071
Parts - Feature - Library External References: Design Library - Library feature 'link to library part' gets errors if the derived feature from library feature is just edited without changes or changed.
SOLIDWORKS
937102
SOLIDWORKS Electrical -Schematic Drawings: Wire style Formula - Wrong Equipotential number generated in scheme after applying the Equipotential Formula.
SOLIDWORKS Electrical
937112
SOLIDWORKS Routing - Piping: Crash when edit dimension in context of assembly - file specific.
SOLIDWORKS Routing
937585
SOLIDWORKS Plastics - Preprocessing, Physical Materials: PVT values specified by SI (m^3/kg) unit are incorrectly converted in user-defined material with Data Fit command.
SOLIDWORKS Plastics
937694
User Interface - General: Reduce tree spacing at higher Dots Per Inch / DPI .
SOLIDWORKS
937952
SOLIDWORKS PDM Integration - SOLIDWORKS Add-In: Crash in ConisioCAD!CPictureBox::mvSetBitmap when checking out in sequence drawing and then assembly.
SOLIDWORKS PDM
937971
SOLIDWORKS Plastics - Mesh, Solve: Number of Elements box enters numerical values backwards in the SOLIDWORKS Plastics Runner and Cooling Channel System Design. Entering a value of 14, enters a value of 41.
SOLIDWORKS Plastics
938938
SOLIDWORKS Electrical - 3D SOLIDWORKS Routing, Wiring: SOLIDWORKS Route with Use lines and Add Tangency sometimes ignores the color/diameter of cores/cables."
SOLIDWORKS Electrical
939803
SOLIDWORKS Electrical - PLCs, Connectors: Unable to update existing connectors using a connector configuration to reflect attribute changes (add, move, delete) made to the configuration.
SOLIDWORKS Electrical
939868
SOLIDWORKS Simulation -Static Interface: When running static thermal stress study with mesh which is copied from thermal study by right click menu, thermal study is recalculated.
SOLIDWORKS Simulation
940013
User Interface - General: Drawing Feature Manager expands when display is to more than 100 %.
SOLIDWORKS
940087
SOLIDWORKS API - Macro: IBomTableAnnotation::GetComponents2 behavior regression from 2015 to 2016
SOLIDWORKS API
940117
SOLIDWORKS Electrical - Schematic: Component Marks predefined formula for based on row is not correct.
SOLIDWORKS Electrical
940607
Drawings - Dimension - DRW (Select, Create): Cosmetic Thread - PropertyManager - we are no longer able to apply dual dimensions or tolerance to cosmetic threads within drawings
SOLIDWORKS
940623
SOLIDWORKS Simulation - Composite Interface: The 'Composite Orientation' face selection is not highlighted in the graphics window in SOLIDWORKS 2015 onward.
SOLIDWORKS Simulation
940664
SOLIDWORKS Electrical - Import, Export: Export to PDF does not have bookmarks
SOLIDWORKS Electrical
940665
SOLIDWORKS API - SOLIDWORKS PDM - Command - Check-In: Foreign Language - Turkish: Check in dialog fails to list cut-list items if weldment part is saved with Turkish language SOLIDWORKS
SOLIDWORKS API
940674
Assemblies, Reload, Replace: Crash occurs when replacing components twice in the same sub-assembly.
SOLIDWORKS
940826
SOLIDWORKS Simulation - Options: Inertia Relief in a 2D Axi symm model. Block the activation of the 'Inertia Relief' option for 2D Axisymmetrical analyses. It is not supported and produces wrong results.
SOLIDWORKS Simulation
940835
SOLIDWORKS Electrical - Terminals: Wire number incorrect or blank for terminals with wires and blocks on pin.
SOLIDWORKS Electrical
941170
SOLIDWORKS Simulation - Weldment Solver: Beam bonded to either solid or shell stiffener body in Nonlinear study behaves almost rigidly everywhere except in bonded regions - wrong results.
SOLIDWORKS Simulation
941207
SOLIDWORKS Simulation - Load Case Manager: Load case manager icons for gravity 'along plane dir 1' and 'along plane dir 2' are switched, and therefore label the incorrect quantity.
SOLIDWORKS Simulation
941686
SOLIDWORKS Simulation - Static Interface: Hidden load/fixture/connector symbols are shown again after using 'List Connector Force' tool.
SOLIDWORKS Simulation
941692
Parts - Tools - Equations: SOLIDWORKS 2016 crashes for this specific part with an embedded macro in the equation editor.
SOLIDWORKS
941976
eDrawings Publisher - General: eDrawings only displays small area in upper left corner.
SOLIDWORKS
941984
SOLIDWORKS Electrical - Schematic: Project specific : SOLIDWORKS Electrical 2D - Application hangs / freezes when scheme is selected.
SOLIDWORKS Electrical
942421
SOLIDWORKS API - Enhancement: Provide API to identify which equation is a global variable from Equation Manager.
SOLIDWORKS API
942617
SOLIDWORKS Electrical -Schematic: Symbols/Manufacturer pats which included in library has been disabled in Project>Configuraiotns>Libraries and Palettes should not be displaied in right graphic area when select 'All' in Filter/library
SOLIDWORKS Electrical
942780
Sketcher - Sketch Tools: 'Sketcher confirm delete' dialog does not prompt while deleting sketch entities that has an associated dimension.
SOLIDWORKS
942863
Drawings - Dimension - DRW (Select, Create) Drawing Views - Detail, Cropped: Dimensions in detail views go outside of drawing sheet when placed.
SOLIDWORKS
942896
Parts, Derive Component: Part with multiple configurations that contains an inserted part with multiple configurations which are used in different configurations of the parent part does not rebuild properly switching configs.
SOLIDWORKS
943130
Parts, Feature -- Mirror, Derived Part External References: Unstable external references in the derived configurations of the derived parts - under specific conditions of usage in assembly.
SOLIDWORKS
943164
Parts, Feature - Hole Wizard: When hole specifications> close or Loose is selected, hole wizard option 'show custom sizing' cannot be deselected.
SOLIDWORKS
943178
Parts - Open: Crash opening part file in 2016 which opens without error in 2015.
SOLIDWORKS
943205
SOLIDWORKS Flow Simulation -Solver: Flow Simulation crashes when running the Parametric Study while saving the results of the first Design Point.
SOLIDWORKS Flow Simulation
943236
Parts, Cosmetic Threads - Part, Assembly: Assembly level hole feature shows rebuild icon on deleting part from assembly and on re-opening assembly, cosmetic thread is out of place.
SOLIDWORKS
943406
SOLIDWORKS Network Licensing (SNL) : Delay inserting a smart dimension in an assembly sketch in an SNL environment; delay is longer if invalid (no longer in use) or stopped license server is specified
SOLIDWORKS
943458
SOLIDWORKS PDM - BOM Tables: In local view, BOM doesn't show anything when assembly that has a BOM is saved in case that View > Top Level Annotations is disabled.
SOLIDWORKS PDM
943461
SOLIDWORKS Electrical -Schematic Drawings: Setting 0 in 2D footprints alignment doesn't work when 2D footprint symbol has dimension which style is ISO-25 with text alignment is 'Aligned with dimension line'
SOLIDWORKS Electrical
943621
SOLIDWORKS Electrical -Schematic: Equipotential formula not showing correct information.
SOLIDWORKS Electrical
943654
Installation General - Workgroup PDM - Vault: Installation Manager (IM) installs 2016 Workgroup PDM Server application under “Program Files (x86)” despite being x64 application’.
SOLIDWORKS
943657
DXF/DWG - Translator - DXF, DWG OLE: XLS embedded OLE object in drawing is not exported to dwg or dxf if office 2013 is installed.
SOLIDWORKS
943686
SOLIDWORKS PDM - Command - Get File: Get latest version on assembly takes 4 minutes to display reference tree when user is member of multiple groups
SOLIDWORKS PDM
943921
SOLIDWORKS Plastics - Preprocessing: Copy / Paste a Material > Insert > Default Database material into the User-defined Database > Edit name and change values > Close and re-open and the material is not selected
SOLIDWORKS Plastics
944027
SOLIDWORKS Visualize - Import, Foreign Language - General: Solvenian Decals goes missing when save project in Visualize..
SOLIDWORKS Visualize
944166
SOLIDWORKS Simulation - Design Study: Typo in Design Study message 'Not all design varialbes are linked to Simulation Study' - 'variables' should be 'variables'
SOLIDWORKS Simulation
944333
Parts - Cosmetic Threads - Part, Assy Feature - Hole Wizard: Cosmetic thread diameter of hole wizard is reset (M0) after switching configuration.
SOLIDWORKS
944638
Localization - Foreign Language - Italian: Toolbox - Calculators: Crash while selecting Bearing Calculator option after checking SOLIDWORKS Tool Box Utilities add-In .
SOLIDWORKS
944714
Parts, Save, Close: Unable to reopen assembly document after having saved to SOLIDWORKS 2015 because. of invalid document properties.
SOLIDWORKS
944803
User Interface - Property Manager: File Specific Crash: When rotating this part when attempting to extend surface SOLIDWORKS crashes.
SOLIDWORKS
945075
Parts, Tools - Mass, Section Properties:Overridden Inertia Moments are not retained after closing the file.
SOLIDWORKS
945153
Assemblies - Delete Component: File specific: SOLIDWORKS hangs on deleting the toolbox components.
SOLIDWORKS
947031
SOLIDWORKS API Sketch Dimensions: IModelDoc2::AddDimension2 degraded performance in SW2016 as compared to 2014 and 2015
SOLIDWORKS API
947276
Drawings - Dimension - DRW (Edit, Revise, locate - Configurations - Assemblies)Configured dimensions controlled by Design Table are overridden if user performance Select All and makes changes to dimension font
SOLIDWORKS
947309
User Interface - General: Formatting toolbar overlaps note in edit mode with ‘Larger’ button size and larger display size 125% and 150%
SOLIDWORKS
948187
SOLIDWORKS Simulation - Loads: Initial condition item from the nonlinear dynamic setup to the frequency or the static study.
SOLIDWORKS Simulation
948410
SOLIDWORKS PDM API - Help, Documentation: Help for IEdmTaskInstance::SetValEx and GetValEx should detail restrictions on data types supported
SOLIDWORKS PDM
948661
SOLIDWORKS Simulation - Static Interface:: 'Run all studies' option on a Static Study with imported Thermal Effect from Flow simulation does not work
SOLIDWORKS Simulation
948693
SOLIDWORKS API - Dimension: Enhancement: New API required for creating only the base line ordinate dimension.
SOLIDWORKS API
948706
Parts, Tools - Mass, Section Properties Tools - Equations: Overridden Mass Properties reset to original after changing a Custom Property if the part contains equations.
SOLIDWORKS
948736
SOLIDWORKS PDM Integration, File Operations: Encrypted PDF (password protected) files are not handled in SOLIDWORKS PDM vault - error 'PDM cannot read or write the contents of the file'
SOLIDWORKS PDM
949819
Assemblies, Tables - Design Table: Value of cell 'A1' in Design table changed to 'Design Table for: FILE NAME' , causes other cells depends on the value to break.
SOLIDWORKS
949830
Installation - SOLIDWORKS Installation General: Updating to SOLIDWORKS 2016 deletes SOLIDWORKS fonts (SWXXX).
SOLIDWORKS
950005
SOLIDWORKS API - Help, Documentation: MultiSelect2 problem. Needs description about “MultiSelect” API about “heterogeneous” array.
SOLIDWORKS API
950280
SOLIDWORKS Electrical -Schematic Drawings: Drawing Tool - Array - Unable to remove the '-' negative mark from the Row offset.
SOLIDWORKS Electrical
950312
eDrawings Publisher: Arrow head annotations are visible in eDrawings after saving SOLIDWORKS file as .eprt.
SOLIDWORKS
950329
SOLIDWORKS Plastics - Mesh, Solve: File Specific - Incorrect Pressure at End of Fill when thin insert is included in this part.
SOLIDWORKS Plastics
950832
Drawings, Annotations - Note, Balloon: $PRPMODEL instead of $PRPWLD, balloon looses Document Properties
SOLIDWORKS
950875
SOLIDWORKS Electrical - Import, Export Export with landscape orientation selected will print the first sheet with portrait orientation the first time the PDF is exported. Correct output is seen when exported a second time.
SOLIDWORKS Electrical
951001
Graphics - Color, Appearances: Appearance is lost on some faces of assembly cut feature after adding additional cut which modifies the face.
SOLIDWORKS
951219
SOLIDWORKS Electrical -Schematic Drawings: Cannot add any Text characters or value between '0' and '1' into Dimension text.
SOLIDWORKS Electrical
951308
SOLIDWORKS Simulation - Fatigue, User Interface: The option 'Worst damage location' does not work when creating a Rainflow or Damage matrix chart.
SOLIDWORKS Simulation
951447
Parts, Surface Offset: Edit component in an assembly environment - One or more external references are missing if the component is loaded as well - Specific Approach.
SOLIDWORKS
951504
Sketch Geometry Mate - Standard: File specific: Concentric mates lose reference when opened in 2015
SOLIDWORKS
951517
Parts, Feature - Cut List: Single body cutlist shows duplicated features. It appears the cause of the problem are some library features.
SOLIDWORKS
951541
SOLIDWORKS Simulation - Composite Interface, Shell Interface: Clicking on surface body in graphics area does not select/highlight corresponding composite shell in Simulation study tree.
SOLIDWORKS Simulation
951596
Sketch Geometry: SOLIDWORKS crashes when copy and pasting 3d sketch from this part to a new part.
SOLIDWORKS
951663
SOLIDWORKS PDM Integration - AutoCAD:Missing toolbars in AutoCAD graphical area, while check-in a second drawing, when the first drawing is still open.
SOLIDWORKS PDM
951752
SOLIDWORKS Routing - Piping: Weld gap is not applied to all the pipes using the customer’s components
SOLIDWORKS Routing
951755
DXF/DWG - Translator - PDF Out:Crash when saving this assembly file as 3d PDF.
SOLIDWORKS
951769
SOLIDWORKS PDM - API, Help - Documentation: Help for IEdmCmdMgr5::AddToolbarImage should indicate that this API does not work with Windows Vista and later
SOLIDWORKS PDM
951792
Drawings, Annotations - Note, Balloon:Stack Note, stack size doesn't change when changing it's percentage.
SOLIDWORKS
951814
SOLIDWORKS Flow Simulation - Interface - Settings:Rotating Region Parametric Study, Goal Optimization, input parameter for Rotating Regions is missing from 2016 SP3
SOLIDWORKS Flow Simulation
951904
DXF/DWG - Translator - PDF Out: SOLIDWORKS crash when export attached assembly as 3D PDF on Windows10 machine.
SOLIDWORKS
952022
Assembly - General: File specific; SOLIDWORKS crashes when clicking 'Insert Components' or create new assembly file while this assembly is open.
SOLIDWORKS
952101
SOLIDWORKS Simulation - Connector-Spot, Edge Weld: Edge Weld connector unit conversion seems incorrect yielding incorrect results.
SOLIDWORKS Simulation
952276
SOLIDWORKS Simulation - Static Interface Save, Close - Part: File 'temporaryStorage' remains after saving if 'Load all Simulation studies when opening a model' option is disabled (off)
SOLIDWORKS Simulation
952314
SOLIDWORKS Simulation - Nonlinear Solver: Direct Sparse solver gets 'Database not found' error in Nonlinear study with No Penetration.
SOLIDWORKS Simulation
952520
SOLIDWORKS Electrical - Symbols, Create, Edit: Foreign Language - Korean: 'Korean specific: SWE2D crashed when click 'Add new circuit' in Edit symbol User Interface.
SOLIDWORKS Electrical
952884
Costing - Template Editor: Decimal value is rounded to the nearest integer if when entered as Thickness value in Costing Template Editor.
SOLIDWORKS
952911
SOLIDWORKS Simulation - Frequency, Buckling Analysis: Provide warning when running or setting up Frequency Shift studies with non-supported solvers, informing that Direct Sparse solver is needed
SOLIDWORKS Simulation
953122
SOLIDWORKS Electrical - Schematic: Cannot change properties for multiple drawing at once time via side properties pane, only first of selected drawing location changed, others keep older one.
SOLIDWORKS Electrical
953216
Sketcher, Sketch Geometry: Configuration specific extruded cut sketch dimension direction is flipped (reversed) when activating the configuration.
SOLIDWORKS
953344
SOLIDWORKS Electrical - Terminals: Auto page break not following the terminal strip length and terminal weight setting.
SOLIDWORKS Electrical
953358
Drawings - Dimension - DRW (Select, Create) Annotations - Cosmetic Threads:Conical offset cosmetic thread dimension in drawing is not linked to the feature diameter but calculated as offset surface
SOLIDWORKS
953726
Drawings, Dimension - DimXpert: Incorrect fit tolerance value for DimXpert slot dimensions in parts.
SOLIDWORKS
953877
SOLIDWORKS API File Properties: A custom property value of mirrored part is missing when performing CustomPropertyManager::Add3 and update the original part.
SOLIDWORKS API
953953
SOLIDWORKS API: When a Perimeter Circle is created via the API,PerimeterCircle and hover mouse over the sketch in graphics area it throws an error
SOLIDWORKS API
953978
SOLIDWORKS API - Help, Documentation: Add the information to add “eDrawingHostControl.dll” to tool box and also without adding the control to tool box in eDrawing API “Getting St
SOLIDWORKS API
953986
SOLIDWORKS Electrical -Schematic Drawings: Draw - Insert block - Copy and paste the block - R6025 Runtime error followed by a crash
SOLIDWORKS Electrical
954071
SOLIDWORKS Electrical -Schematic: Variable for book tag does not populate in wire mark in 2016.
SOLIDWORKS Electrical
954072
SOLIDWORKS Electrical -Schematic Drawings: Wire labels cannot be shown and are removed if user has launched the Report Manager.
SOLIDWORKS Electrical
954197
SOLIDWORKS PDM - Contains and Where Used: Where Used takes an excessive amount of time (poor performance) to show information (vault specific).
SOLIDWORKS PDM
954420
Drawings, Annotations - Centerline, Center Mark: The dangled dimension is not reattached on a Reattach circular center mark.
SOLIDWORKS
954462
Drawings - Dimension - DRW (Edit, Revise, Locate): Orientation of dimension is flipping around after ctrl+q.
SOLIDWORKS
954568
SOLIDWORKS API: Crash occurs when IDrawingComponent::Component is accessed within the NewSelectionNotify
SOLIDWORKS API
955443
SOLIDWORKS Electrical - Terminals:-Terminal strip editor - Automatic page break is inserted when the customer open SOLIDWORKS Electrical 2014 projects in SOLIDWORKS Electrical 2016 SP03
SOLIDWORKS Electrical
956048
Assemblies - Large Design Review: Hide/Show sub-assembly in Large Assembly Design Review mode takes much more time than in SOLIDWORKS 2014.
SOLIDWORKS
956923
Parts - Cosmetic Threads - Part, Assembly: Diameter and Depth values of cosmetic thread are changed when switching configuration.
SOLIDWORKS
957137
Graphics, Display - Parts: In this part, when the dimension is inserted to 3D sketch, SOLIDWORKS crashes.
SOLIDWORKS
957253
Assemblies Feature Manager - Configurations: Cannot change part configuration selecting the part from the - Feature Manager Design tree (FMDT) - green check - Left Mouse Button.
SOLIDWORKS
958525
SOLIDWORKS Electrical -Schematic: Equipotential conflict appearing incorrectly - project specific.
SOLIDWORKS Electrical
958563
SOLIDWORKS Electrical - Terminals: Terminal strips named incorrectly when created from the component browser.
SOLIDWORKS Electrical
958903
SOLIDWORKS API - Options: Need API access to new user preference integer System > Colors > Icon color.
SOLIDWORKS API
958987
User Interface - Feature Manager:Left clicking twice on part or sub-assembly in Feature Manager tree, focus jumps on top of the assembly if another sub-assembly is expanded.
SOLIDWORKS
959046
SOLIDWORKS Electrical - Reports: Report quantities do not generate correctly with 2012 SQL server and 2016 SOLIDWORKS Electrical.
SOLIDWORKS Electrical
959215
SOLIDWORKS PDM - Command - Copy and Move Tree: Move or Move Tree of large assembly structure leaks several hundred Mb for Explorer.exe each session and memory is not released *dataset specific*
SOLIDWORKS PDM
960763
SOLIDWORKS Simulation - Connector - Bearing: For a non self-aligning bearing connector, unit 'N/m' is given for the radial and axial stiffness.
SOLIDWORKS Simulation
961044
Parts, Feature - Weldments: Weldment extend does not work as expected when merge arc entities is selected.
SOLIDWORKS
961487
SOLIDWORKS Electrical - Schematic Drawings: Modify - Trim , quickly continuous click several entities need to be trimmed - R6025 Runtime error followed by a crash.
SOLIDWORKS Electrical
961510
Costing - General: Costing shows negative values for some features in this Part file..
SOLIDWORKS
961989
Graphics, Display - Parts: File specific: Zoom to fit does not function correctly on this part that containsan imported body. Bounding box is too large.
SOLIDWORKS
962477
SOLIDWORKS Electrical -Schematic Drawings: Crash when copying and pasting schematic contents from one project to another- Runtime error!; Program C:\Program Files\SOLIDWO…; R6025 - pure virtual functional call
SOLIDWORKS Electrical
964169
SOLIDWORKS Electrical - Schematic: Wires are lost when Cut / Paste option is used into the scheme
SOLIDWORKS Electrical
964899
Sheet Metal Base Geometry Feature - Extrude: Normal cut features fail in this sheet metal part unless going through the bend
SOLIDWORKS
966283
Assemblies, Interference Detection: Attached assembly hangs after clicking on Interference detection command. File specific.
SOLIDWORKS






本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有賬號?註冊

x
發表於 2016/7/28 11:04:36 | 顯示全部樓層
零件配置的质量链接BUG有没有解决?
發表於 2016/7/28 20:58:25 | 顯示全部樓層
更新了,期待2017版的吧!除了那討厭的十字游標改成筆的圖型外,沒什麼讓你更新的動力
發表於 2016/7/29 08:47:42 | 顯示全部樓層
每次升級後,檔案關連性就會喪失


sp1->sp2->sp3->sp4 ,已經4次了
還要再手動恢復

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有賬號?註冊

x

點評

我也是覺得很麻煩,我看等SP5.0發布後再升級好了。  詳情 回復 發表於 2016/8/3 11:33
發表於 2016/8/3 10:36:35 | 顯示全部樓層
原點比較大,無論使用者座標或世界座標

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有賬號?註冊

x
發表於 2016/8/3 11:33:28 | 顯示全部樓層
arlango 發表於 2016/7/29 08:47
每次升級後,檔案關連性就會喪失

我也是覺得很麻煩,我看等SP5.0發布後再升級好了。
 樓主| 發表於 2016/8/4 18:14:13 | 顯示全部樓層
SOLIDWORKS 2016 新增功能,使用"動態強調顯示"可以選擇線段中點,但每次選線標註時都會盡量點圖元中間,但就會造成一直點到點的困擾。
這個問題在2016 SP4已經解決了,讓使用者不會直接就選到中點。
如果真的想點選,滑鼠須停留在中點附近1-2秒就能喚醒此功能了。

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有賬號?註冊

x
發表於 2016/8/8 21:03:58 | 顯示全部樓層
原點對大郎寫教材很重要,左圖 先前版本,右圖 2016 SP4.0

重點是 可以很快看出這是草圖環境的圖形

以前大郎要做草圖原點小圖示,自行拉大來合成圖片,很痛苦

SOLIDWORKS 的貼心,不在話下

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有賬號?註冊

x
您需要登錄後才可以回帖 登錄 | 註冊

本版積分規則

論壇統計|手機版上論壇|論壇來自幾何科技 論壇架構版次 20240312

GMT+8, 2024/3/29 08:50 , Processed in 0.122396 second(s), 17 queries .

Powered by Discuz! X3.4 Licensed

© 2001-2023 Discuz! Team.

快速回復 返回頂部 返回列表