calloutformat 異型孔變數名稱描述

YOYOYO

calloutformat.txt 檔案位於 C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\lang\chinese\calloutformat.txt

將ISO標準-名詞及變數描述翻譯
-----------------------------------------------------------------------------------------------------------------------------------

* (c)2002 Solidworks Corp.
* 異形孔精靈標註格式定義檔案
* 製作日期：7/4/2002
**
* 定界符；斷開格式為標註行 1；尺寸文字行 2；及標註行 3 (如果需要的話)
* \ 字元表示標註繼續至下一行，* 字元表示說明行
* 檔案最後的部分是與編輯相關的額外說明。

*
**********************************************************************************
**NO-NUMBER-OF-INSTANCES                                                                                                **
[ISO]
**********************************************************************************
**                        COUNTERBORED HOLES (柱孔)                                                                   **
**********************************************************************************
*
* Blind Hole (盲孔)
COUNTERBORE-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>
*
* with underhead countersink (頭端下方錐孔)
COUNTERBORE-BLIND(csms)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>
*
* with nearside countersink (近端錐孔)
COUNTERBORE-BLIND(csns)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with near and underhead countersink (近端錐孔和頭端下方錐孔)
COUNTERBORE-BLIND(csnm)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* Thru Hole (貫穿)
COUNTERBORE-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>
*
* with farside countersink (遠端錐孔)
COUNTERBORE-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with underhead countersink (頭端下方錐孔)
COUNTERBORE-THRU(csms)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* with underhead and far countersink (頭端下方錐孔和遠端錐孔)
COUNTERBORE-THRU(csmf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
COUNTERBORE-THRU(csns)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with near and farside countersink (近端錐孔和遠端錐孔)
COUNTERBORE-THRU(csnf)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with near and underhead countersink (近端錐孔和頭端下方錐孔)
COUNTERBORE-THRU(csnm)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* with all 3 countersink (近端、遠端、頭端下方均錐孔)
COUNTERBORE-THRU(csal)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SPOT><MOD-DIAM> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                                                                 **
**                                PLAIN HOLES (鑽孔)                                                                             **
**********************************************************************************
*
* Blind Hole (盲孔)
HOLE-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*
* with nearside countersink (近端錐孔)
HOLE-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
*
HOLE-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*
* with farside countersink (遠端錐孔)
HOLE-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
HOLE-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (遠端及近端均錐孔)
HOLE-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                 **
**                                COUNTERSUNK HOLES (錐孔)                        **
**********************************************************************************
*
* Blind Hole (盲孔)
COUNTERSINK-BLIND=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*
* with added head clearance as counterbore (增加柱孔頭端餘隙)
COUNTERSINK-BLIND(headclr)=<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
*
* Thru Hole (貫穿)
COUNTERSINK-THRU=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>
*
* with farside countersink (遠端錐孔)
COUNTERSINK-THRU(csfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with added head clearance as counterbore (增加柱孔頭端餘隙)
COUNTERSINK-THRU(headclr)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
*
* with head clearance and far side countersink (增加柱孔頭端餘隙和遠端錐孔)
COUNTERSINK-THRU(hcfs)=<MOD-DIAM> <hw-thruholedia> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT><MOD-DIAM> <hw-csdia> <HOLE-DEPTH> <hw-headclr>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                                TAPPED HOLES (螺紋孔)                                **
**********************************************************************************
*
* Blind Hole (盲孔)
TAP-BLIND=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*
* with nearside countersink (近端錐孔)
TAP-BLIND(csns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
*when last hole in hole series
TAP-BLIND(series)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*
* with cosmetic thread (裝飾螺紋線)
TAP-BLIND(ct)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*
* with cosmetic thread and nearside countersink (裝飾螺紋線及近端錐孔)
TAP-BLIND(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* drilledand tapped thru (鑽孔及螺紋貫穿)
TAP-THRU(tt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <hw-thru>
*
* with nearside countersink (近端錐孔)
TAP-THRU(ttcsns)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with farside countersink (遠端錐孔)
TAP-THRU(ttcsfs)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with both countersink (近端錐孔及遠端錐孔)
TAP-THRU(ttcsnf)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* drilledthru but with blind threads  (孔貫穿但盲螺紋)
TAP-DRILLTHRU=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*
* with cosmetic thread and drilled and tapped thru (裝飾螺紋線；孔及螺紋貫穿)
TAP-DRILLTHRU(cstt)=<MOD-DIAM> <hw-thrutapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <hw-thru>
*
* with farside countersink (遠端錐孔)
TAP-DRILLTHRU(csfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
TAP-DRILLTHRU(csns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink(遠端及近端錐孔)
TAP-DRILLTHRU(csnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with cosmetic thread (裝飾螺紋線)
TAP-DRILLTHRU(ct)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>
*
* with cosmetic thread and nearside countersink (裝飾螺紋線及近端錐孔)
TAP-DRILLTHRU(ctcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
TAP-DRILLTHRU(cttcsns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
<hw-threaddesc> <hw-threadclass> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with cosmetic thread and farside countersink (裝飾螺紋線及遠端錐孔)
TAP-DRILLTHRU(ctcsfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with cosmetic thread and both countersink (裝飾螺紋線及近端、遠端錐孔)
TAP-DRILLTHRU(ctcsnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-threaddesc> - 6H <HOLE-DEPTH> <hw-threaddepth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                                PIPE TAPPED HOLES (管螺紋孔)                        **
**********************************************************************************
*
* Blind Hole (盲孔)
PTAP-BLIND=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-descrp>
*
* with nearside countersink (近端錐孔)
PTAP-BLIND(csns)=<MOD-DIAM> <hw-tapdrldia> <HOLE-DEPTH> <hw-tapdrldepth>;\
        <hw-descrp>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Thru Hole (貫穿)
PTAP-THRU=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-descrp>
*
* with farside countersink (遠端錐孔)
PTAP-THRU(csfs)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-descrp>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
PTAP-THRU(csns)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-descrp>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (近端及遠端均錐孔)
PTAP-THRU(csnf)=<MOD-DIAM> <hw-tapdrldia> <hw-thru>;\
        <hw-descrp>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                DOWEL HOLES (NOMINAL)        定位孔 (公稱)                                **
**********************************************************************************
*
* Blind Hole (盲孔)
DOWEL-NOMINAL-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*
* with nearside countersink (近端錐孔)
DOWEL-NOMINAL-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Blind Hole (盲孔)
DOWEL-NOMINAL-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*
* with farside countersink (遠端錐孔)
DOWEL-NOMINAL-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
DOWEL-NOMINAL-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (近端及遠端均錐孔)
DOWEL-NOMINAL-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                        DOWEL HOLES (PRESS)        定位孔 (按下)                        **
**********************************************************************************
*
* Blind Hole (盲孔)
DOWEL-PRESS-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*
* with nearside countersink (近端錐孔)
DOWEL-PRESS-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Blind Hole (盲孔)
DOWEL-PRESS-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*
* with farside countersink (遠端錐孔)
DOWEL-PRESS-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
DOWEL-PRESS-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (近端及遠端均錐孔)
DOWEL-PRESS-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                        DOWEL HOLES (CLEARANCE)        定位孔 (餘隙)                        **
**********************************************************************************
*
* Blind Hole (盲孔)
DOWEL-CLEARANCE-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*
* with nearside countersink (近端錐孔)
DOWEL-CLEARANCE-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
DOWEL-CLEARANCE-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*
* with farside countersink (遠端錐孔)
DOWEL-CLEARANCE-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
DOWEL-CLEARANCE-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (近端及遠端均錐孔)
DOWEL-CLEARANCE-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                        DOWEL HOLES (TRANSITIONAL)        定位孔 (轉變的)                **
**********************************************************************************
*
* Blind Hole (盲孔)
DOWEL-TRANSITIONAL-BLIND=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>
*
* with nearside countersink (近端錐孔)
DOWEL-TRANSITIONAL-BLIND(csns)=;<MOD-DIAM> <hw-diam> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Blind Hole (盲孔)
DOWEL-TRANSITIONAL-THRU=;<MOD-DIAM> <hw-diam> <hw-thru>
*
* with farside countersink (遠端錐孔)
DOWEL-TRANSITIONAL-THRU(csfs)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* with nearside countersink (近端錐孔)
DOWEL-TRANSITIONAL-THRU(csns)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* with both countersink (近端及遠端均錐孔)
DOWEL-TRANSITIONAL-THRU(csnf)=;<MOD-DIAM> <hw-diam> <hw-thru>;\
        <HOLE-SINK><MOD-DIAM> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK><MOD-DIAM> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                        COSMETIC THREAD CALLOUT (裝飾螺紋線)                        **
**********************************************************************************
*
*機械內螺紋*
MACHINE-THREADS-INTERNAL=<cthrd-size> <cthrd-type>
*機械外螺紋*
MACHINE-THREADS-EXTERNAL=<cthrd-size> <cthrd-type>
*直管內螺紋*
STRAIGHT-PIPE-TAPPED-THREAD-INTERNAL=<cthrd-size> <cthrd-type>
*直管外螺紋*
STRAIGHT-PIPE-TAPPED-THREAD-EXTERNAL=<cthrd-size> <cthrd-type>
*
**********************************************************************************
**                                [ISO]                                                **
**                        COUNTERBORED SLOTS        (柱孔狹槽)                        **
**********************************************************************************
*
* Blind slot with nearside counterbore
SLOT-COUNTERBORE-BLIND=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>
*
* Blind slot with underhead countersink
SLOT-COUNTERBORE-BLIND(csms)=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>
*
* Blind slot with nearside countersink
SLOT-COUNTERBORE-BLIND(csns)=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Blind slot with near and underhead countersinks
SLOT-COUNTERBORE-BLIND(csnm)=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* Thru slot with nearside counterbore
SLOT-COUNTERBORE-THRU=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>
*
* Thru slot with farside countersink
SLOT-COUNTERBORE-THRU(csfs)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* Thru slot with underhead countersink
SLOT-COUNTERBORE-THRU(csms)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* Thru slot with underhead and far countersinks
SLOT-COUNTERBORE-THRU(csmf)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* Thru slot with nearside countersink
SLOT-COUNTERBORE-THRU(csns)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Thru slot with near and farside countersinks
SLOT-COUNTERBORE-THRU(csnf)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* Thru slot with near and underhead countersinks
SLOT-COUNTERBORE-THRU(csnm)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>
*
* Thru slot with near, mid, and farside countersinks
SLOT-COUNTERBORE-THRU(csal)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SPOT> <hw-cbdia> <HOLE-DEPTH> <hw-cbdepth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK> <hw-midcsdia> X <hw-midcsang>, <hw-msgmidside>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                        PLAIN SLOTS        (狹槽)                                  **
**********************************************************************************
*
* Blind slot
SLOT-BLIND=;<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>
*
* Blind slot with nearside countersink
SLOT-BLIND(csns)=;<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Thru slot
SLOT-THRU=;<hw-diam> X <hw-slot-length> <hw-thru>
*
* Thru slot with farside countersink
SLOT-THRU(csfs)=;<hw-diam> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* Thru slot with nearside countersink
SLOT-THRU(csns)=;<hw-diam> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>
*
* Thru slot with both countersinks
SLOT-THRU(csnf)=;<hw-diam> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-nscsdia> X <hw-nscsang>, <hw-msgnearside>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
**********************************************************************************
**                                [ISO]                                                **
**                COUNTERSUNK SLOTS        (錐孔狹槽)                                 **
**********************************************************************************
*
* Blind slot with nearside countersink
SLOT-COUNTERSINK-BLIND=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>
*
* Blind slot with added head clearance as counterbore
SLOT-COUNTERSINK-BLIND(headclr)=<hw-diam> X <hw-slot-length> <HOLE-DEPTH> <hw-depth>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
*
* Thru slot with nearside countersink
SLOT-COUNTERSINK-THRU=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>
*
* Thru slot with farside countersink
SLOT-COUNTERSINK-THRU(csfs)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
*
* Thru slot with added head clearance as counterbore
SLOT-COUNTERSINK-THRU(headclr)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT> <hw-csdia> <HOLE-DEPTH> <hw-headclr>
*
* Thru slot with head clearance and far side countersink
SLOT-COUNTERSINK-THRU(hcfs)=<hw-thruholedia> X <hw-slot-length> <hw-thru>;\
        <HOLE-SINK> <hw-csdia> X <hw-csang>;\
        <HOLE-SPOT> <hw-csdia> <HOLE-DEPTH> <hw-headclr>;\
        <HOLE-SINK> <hw-fscsdia> X <hw-fscsang>, <hw-msgfarside>
**********************************************************************************
**                                VARIABLES                                        **
**********************************************************************************
*
*Each string right of the = above may be customized to suit with plain text entries
*or appropriate Hole Wizard variables.        One variable may be used in place of another.
*Hole Wizard variables are in lower case letters, and have the form: <hw-type>
*The items in capital letters are SolidWorks symbol names, and have the form: <MOD-DIA>
*
*上述新項目 = 的左邊不會被使用。
*刪除上述字串任何項目 = 的左邊，可能導致相關的鑽孔有空白的孔標註。
*
*有效的異形孔精靈變數如下：
*VARIABLE                DESCRIPTION*
*<hw-cbdepth>                Counterbore Depth (柱孔深度)
*<hw-cbdia>                Counterbore Diameter (柱孔直徑)
*<hw-cdrlang>                Counterdrill Angle (柱孔角度)
*<hw-cdrldepth>                Counterdrill Depth (沈頭孔深度)
*<hw-cdrldia>                Counterdrill Diameter (沈頭孔直徑)
*<hw-csang>                Countersink Angle (錐孔角度)
*<hw-csdia>                Countersink Diameter (錐孔直徑)
*<hw-depth>                Depth (深度)
*<hw-descrp>                Description (描述)
*<hw-diam>                Diameter (直徑)
*<hw-drlang>                Drill Angle (導頭角度)
*<hw-endcond>                End Condition (終止型態)
*<hw-fscsang>                Far Side Countersink Angle (遠端錐孔角度)
*<hw-fscsdia>                Far Side Countersink Diameter (遠端錐孔直徑)
*<hw-fstsze>                Fastener Size (扣件大小)
*<hw-fsttyp>                Fastener Type (扣件類型)
*<hw-headclr>                Head Clearance (頭端餘隙)
*<hw-holedepth>                Hole Depth (鑽孔深度)
*<hw-holedia>                Hole Diameter (鑽孔直徑)
*<hw-midcsang>                Middle Countersink Angle (中間錐孔角度)
*<hw-midcsdia>                Middle Countersink Diameter (中間錐孔直徑)
*<hw-minordia>                Minor Diameter (次要直徑)
*<hw-mjrdia>                Major Diameter (主要直徑)
*<hw-nscsang>                Near Side Countersink Angle (近端錐孔角度)
*<hw-nscsdia>                Near Side Countersink Diameter (近端錐孔直徑)
*<hw-slot-length>        Slot Length (槽長)
*<hw-std>                Standard (標準)
*<hw-tapdrldepth>        Tap Drill Depth (螺孔鑽深度)
*<hw-tapdrldia>                Tap Drill Diameter (螺孔鑽直徑)
*<hw-threadang>                Thread Angle (螺紋角度)
*<hw-threadclass>        Thread Class (1B, 2B or 3B, applies to Ansi Inch holes only) (螺紋分類)
*<hw-threaddepth>        Thread Depth (螺紋深度)
*<hw-threaddesc>         Thread Description (螺紋說明)
*<hw-threaddia>                Thread Diameter (螺紋直徑)
*<hw-threadseries>        Thread Series (螺紋連續)
*<hw-threadsize>        Thread Size (螺紋大小)
*<hw-thruholedepth>        Thru Hole Depth (貫穿孔深度)
*<hw-thruholedia>        Thru Hole Diameter (貫穿孔直徑)
*<hw-thrutapdrldia>        Thru Tap Drill Diameter (貫穿螺孔鑽直徑)
*<hw-thrutapdrldp>        Thru Tap Drill Depth (貫穿螺孔鑽深度)
*<hw-type>                Type (類型)
*        
* Cosmetic thread callout variables
*
*<cthrd-depth>                Thread Depth (裝飾螺紋-深度)
*<cthrd-major-dia>        Major Diameter (裝飾螺紋-主要直徑)
*<cthrd-minor-dia>        Minor Diameter (裝飾螺紋-次要直徑)
*<cthrd-size>                Size
*<cthrd-std>                Standard
*<cthrd-type>                Type

YOYOYO

螺紋孔-盲孔更改孔標註樣式

YOYOYO

螺紋孔-貫穿/裝飾螺紋孔

YOYOYO

使用裝飾螺紋線不想在螺紋線標註裡出現"機械螺紋"字樣，也可以在此文字檔修改。
找到COSMETIC THREAD CALLOUT (裝飾螺紋的英文) 將cthrd-type刪除，之後就不會再出現了。

namieamruo

請問同一種孔鑽了3個，標註時顯示是3 x （孔的尺寸），如果想改成3x(孔的尺寸)：x前後的空格拿掉。 或是變成(3)-(孔的尺寸)該如何修改文字呢，感謝。

愛玩家

顶一个，谢谢分享