SPR # | Description | Product |
342240 | Would like Visual Studio add-in templates to install in localized version of My Documents | SolidWorks |
378843 | Under GOST standard, Solder and Glue (weld) symbols with Multi-jog leader are incorrectly displayed. | SolidWorks |
406763 | The 3 point center rectangle command does not work properly. | SolidWorks |
439501 | underscores used in property tab builder are ignored in the custom properties tab in SolidWorks | SolidWorks |
446719 | Hole Series feature does not update properly after editing referenced Hole Wizard position | SolidWorks |
541033 | Configure Dimension shows the same value for all configurations in this part | SolidWorks |
570151 | PropertyManagerPageNumberbox::SetRange2 ; The focus of the control moves by pressing Enter key when increment value is set other than 0.0. | SolidWorks API |
592345 | HLR drawing view is displaying helix incorrect when loaded high quality | SolidWorks |
596084 | 'update inactive views' results in missing geometry in drawing | SolidWorks |
597630 | Sheet Metal part with multiple configuration should use "Link to Parent" by default in the derived flat pattern configuration | SolidWorks |
601411 | File specific: "Body is already sheetmetal cannot convert" rebuild error displays on convert to sheet metal feature(s), having the "Keep body" option enabled, that precede a convert to sheet metal feature that has the option disabled | SolidWorks |
608729 | Macro feature with mixed solid and sheet bodies does not update the feature manager correctly | SolidWorks API |
610452 | Edge flange fails with 'Unable to convert this part to a new sheet metal part. This feature can only be applied to a part with a uniform thickness.' | SolidWorks |
628752 | Unable to rollback Feature Freeze bar. 'One or more of this part's configurations is locked' error is given. | SolidWorks |
633723 | The new dropdown list for recently used dimensions and global variables obstructs confirmation/cancel buttons in the dimension modify dialog | SolidWorks |
633891 | Component(s) externally referencing assembly is out-of-context when saving assembly with Pack and Go, renaming files with prefix, and opening new assembly | SolidWorks |
634905 | IPackAndGo::IncludeDrawings set TRUE and IPackAndGo::AddPrefix or ::AddSuffix used does not copy the drawing with updated references | SolidWorks API |
637713 | Mouse movement jerky and very difficult to place balloons in this Assembly Drawing | SolidWorks |
640879 | Component's origin is not inserted coincident with the assembly's origin; the component's mate reference(s) is inserted coincident instead | SolidWorks |
644841 | Crash/performance/memory problems inserting a ruled surface | SolidWorks |
646332 | SolidWorks not managing memory as expected when opening and closing assemblies. | SolidWorks |
649430 | Unnecessary lines appear by Normal To (Ctrl+8). | SolidWorks |
656281 | Import of this STEP file exported from CATIA results in fewer solid bodies and more surfaces in 2010 and newer compared to 2009 and older | SolidWorks |
668959 | 'Save All' button in the Save Modified Documents dialog box overlaps the Cancel button | SolidWorks |
669691 | File specific: mates do not show warnings or errors when should if some mates contain invalid face and edge errors | SolidWorks |
671362 | When user double clicks in a BOM cell to break the link with the document property, the user is presented with Yes or No instead of Keep/Break link | SolidWorks |
673013 | After save IFeature::GetNextSubFeature fails for cut-list items added to existing sub-weldment folders when loading older parts into SolidWorks 2012 or later. | SolidWorks |
673137 | Smart Dimension remains selected when inserting driven dimension and ‘Single command per pick’ option selected | SolidWorks |
673574 | End treatment is not imported on both sides of flange when using Insert > Model Items. | SolidWorks |
674087 | Alpha channel of .PNG decal ignored when part reopened after saving with 'Store appearance, decal and scene data in model' option turned on. | SolidWorks |
675180 | APIs required for set the tolerance values for specified configurations. | SolidWorks API |
678663 | Sweep feature fails on rebuild in SolidWorks 2013. | SolidWorks |
678751 | Crash in ShowConfiguration2 while cycling through a part's configurations and force-rebuilding | SolidWorks API |
680182 | No able to save mesh in SolidWorks Plastics if meshed part name contains percent sign. | SolidWorks Plastics |
680465 | IModelDocExtension::SetUSerPreferenceTextFormat(swUserPreferenceTextFormat_e.swDetailingViewTextFormat, 0, outTextFormat) is not implemented | SolidWorks API |
680577 | Feature driven component pattern, using part level curve driven pattern as driving feature, does not locate the components correctly (stair case example) | SolidWorks |
680987 | Flat pattern drawing view changes to folded state after editing a feature. | SolidWorks |
681216 | Design table 'Block model edits' setting is not respected, changes to 'Allow model edits' after editing the design table. | SolidWorks |
683109 | "Error message. 'One or more bodies used in this Move/Copy feature are no longer in the model' when inserting part and translate (TR manual Lesson3, Ex 10)" | SolidWorks |
683187 | Rebuild error 'The radius of the fillet is too large to fit the surrounding geometry' when force regenerating (Ctrl+Q) this part in SolidWorks 2012. | SolidWorks |
683479 | Identical components are not combined even though the 'Combine Identical Components' option is checked in BOM after doing a 'Pack and Go'. | SolidWorks |
683571 | INewDocument2 Method (ISldWorks) failing for the out-of-proc Applications | SolidWorks API |
684656 | Dragging part into origin in assembly feature manager tree does not place component on origin | SolidWorks |
684931 | An exception occurred while calling SldWorks::CloseAndReopen with the attached drawings | SolidWorks API |
685050 | Part rebuilds multiple times while opening drawing, followed by 'SolidWorks encountered an error opening the document...' | SolidWorks |
685107 | Wacom Tablet does not work expected anymore after upgrading to SolidWorks 2013. | SolidWorks |
685335 | "Boundary surface operation failed to complete: please check input direction1 or direction2 curves and contours." when rebuilding this part in SolidWorks 2012. | SolidWorks |
685606 | Slot callout dimensions use tolerance precision instead of (hole callout dimension) unit precision. | SolidWorks |
685627 | Sweep (cut) along tapered helix path fails in 2013 when did not in 2012 | SolidWorks |
686413 | SolidWorks Plastics Professional: simulation results generated from Shell Mesh do not report Clamp Tonnages | SolidWorks Plastics |
686824 | Option to 'Enable Cell drop down lists' can not be changed after the design table is created | SolidWorks |
687181 | 'Melt temperature is larger than Max. Melt Temperature -461.200000 oF' when opening part with British unit study in SolidWorks Plastics Professional 2012. | SolidWorks Plastics |
687621 | Instability on creating section view with specific part. | SolidWorks |
688046 | IDrawingDoc::CreateRelative View example needed to show how to mark the faces | SolidWorks API |
688271 | API: edge/curve orientation issue "Edge::GetCurveParams3 and Evaluate2 produce inconsistent data". | SolidWorks API |
689248 | API: Selection Filter toolbar shows helix icon instead of Toggle Selection Filter icon. | SolidWorks API |
689260 | Instability rebuilding a specific sheet metal part. | SolidWorks |
689854 | View boundary enlarges twice the normal size after each save after inserting a block. | SolidWorks |
689981 | API: Instability in IGetTrimCurveSize2 function. | SolidWorks API |
691597 | SolidWorks Plastics UI issue, one item is not translated into Korean. | SolidWorks Plastics |
691697 | Patterned components move to incorrect locations when a referenced component including Driven Feature is rotated. | SolidWorks |
692179 | Adding any feature causes flat pattern in multi-body sheet metal part to be suppressed. | SolidWorks |
692372 | SolidWorks is unstable while opening assemblies with SolidWorks Electrical add-in is loaded, Run Time Error 28 - Out of stack space | SolidWorks Electrical |
692603 | The model does not change according to the setting of Design Table by changing the settings of " Purge cached configuration data ". | SolidWorks |
692621 | This part makes SolidWorks unstable | SolidWorks |
692815 | 'Internal error: The Windows Installer for this product component did not run as expected: SldToolboxUpdater'; 1603 error patching installation (installing service pack). | SolidWorks |
693015 | Weld bead mass units are calculated incorrectly in Mass Properties. | SolidWorks |
693054 | Hole callout precision is controlled by Tolerance precision instead of Unit Precision in SolidWorks 2013. | SolidWorks |
693334 | SolidWorks 2013 64-bit (x64) Administrative Image created from 2012 image does not update the correct version of MS Visual C++ 2008 Redistributible. | SolidWorks |
693564 | Unable to open specific assembly file. | SolidWorks |
694502 | File specific: Saving SolidWorks 2012 drawing in 2013 corrupts drawing so cannot be reopened. | SolidWorks |
696499 | $PRPSHEET annotation shows blank property text in eDrawings 2013 if referenced model is not found. | SolidWorks |
697029 | BOM QTY value cannot be changed once set to a value other than -none- | SolidWorks |
697036 | Crash when working with this assembly file | SolidWorks |
697891 | Error ".dll cannot be loaded. Either the Add-in or one of its components is missing" loading some add-ins after setup & solve Plastics study | SolidWorks Plastics |
697939 | After reference parts of drawing is renamed, when a drawing is opened, reference parts of an old name is searched. | SolidWorks |
698159 | Weld lines and Air Traps old results still exist when re-calculated | SolidWorks Plastics |
698291 | User-defined Mold Temperature and Melt Temperature entered in Flow Settings appear with incorrect value in the Summary | SolidWorks Plastics |
698902 | Checkboxes are overlapping and out of place in Weld bead property manager in Russian. | SolidWorks |
698934 | API: Delete feature instability with SolidWorks 2013 (“Unstable while disabling rebuild by returning False from OnRegen when deleting a feature and its sketch.”) | SolidWorks API |
698987 | When pressing Enter key in the size field before displaying mesh, SolidWorks Plastics freezes. | SolidWorks Plastics |
699033 | Memory usage of sldwork.exe greatly increases by repeatedly calling Component2::Transform2 as compared to verion 2011 sp5. | SolidWorks API |
699066 | 'Unable to open the file...' when click 'Link to PDM Configuration' | SolidWorks Electrical |
699208 | Examples of Resulting line style are missing from Tools -> Options -> Document Properties -> Line Style | SolidWorks |
700899 | Can only add Equal Curvature relation between conic and spline if the spline is in same sketch and not fully defined | SolidWorks |
701027 | SolidWorks crashes when deleting an invalid broken out view. | SolidWorks |
701715 | Open file and receive “SolidWorks encountered an error….” message. File specific. | SolidWorks |
701850 | Customer has lost functionality of Features in the Feature Manager that have been Rollback(ed) is a specific part file. | SolidWorks |
702714 | Mold core file becomes very large in file size when saved. | SolidWorks |
702840 | SolidWorks crashes while copy-pasting section views from one drawing sheet to another sheet. | SolidWorks |
703978 | Sheetmetal feature and Baseflange feature is missing child - Flat-Pattern feature - when using IFeature::GetChildren | SolidWorks API |
703997 | Components fail to be suppressed by editing design table. - 3D Partstream related | SolidWorks |
705135 | Crash when deleting a folder | SolidWorks Electrical |
705265 | Sheet-Metal and Flat-Pattern main folder feature IFeature::GetChildren is not consistent with the UI | SolidWorks API |
705348 | FeatureManager::InsertProtrusionBlend2 help mentions Advanced smoothing option for ForceNonRational, but it has been removed in the user interface. | SolidWorks |
705795 | “Solidworks encountered an error opening this document etc…” when trying to open a specific assembly | SolidWorks |
706435 | Sheet metal base feature uses inconsistent numbering (iteration). Uses a Sheet-Metal(#) vs. 2012's Sheet-Metal# scheme. | SolidWorks |
706560 | Brazilian Portuguese - Custom property with bounding box properties do not evaluate in cut list. | SolidWorks |
706708 | This drawing is crashing making a ctrl-q (the issue is coming from one of its parts) | SolidWorks |
706711 | FeatureExtruRefSurface2 having issues with 2012 update (“Help for FeatureExtruRefSurface2 should indicate that sketch segments' Select2 calls should use a selection mark of 0 or 4”). | SolidWorks API |
706897 | OneBendFeatureData.FlatPatternSketchSegments2 does not return sketch segments | SolidWorks API |
714381 | ‘Don’t show again’ message for warning “The cell value is linked…… the value in BOM?” doesn’t work. | SolidWorks |